700_24860_2
Topthema: Zubehör-Kabel · Symphonic Line Harmonie + Harmonie HD + Das Schnelle
Schnelligkeit und Harmonie
Das Thema Kabel ist nicht unumstritten. Dabei kann man es ganz pragmatisch angehen: Gute Kabel ausprobieren und fertig.
>> Mehr erfahren>> Alle anzeigen
698_24855_2
Topthema: Standlautsprecher · Stieb Audio Patos
Die große Reduktion
Man nehme einen Breitbänder, ein Gehäuse und lasse im Grunde alles weitere weg. Heraus kommt wahrscheinlich ein Lautsprecher, der nicht besonders gut klingt. Es sei denn, man weiß, was man tut.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Krix MX-10
Ausstattung & technische Daten
| Specification | |
| Type | Cinema Loudspeaker |
| LCR Speaker Modules | |
| Frequency Range | 40Hz-20kHz in room response |
| Power Handling | 100 – 500 Watts RMS recommended amplifier power |
| Sensitivity | 97dB for 2.83 volts at 1 metre |
| Impedance | 8 Ohms |
| Configuration | 2-way |
| Enclosure Type | Bass reflex, front vented |
| Low Frequency Driver | Single 255mm (10”) paper cone driver. 50mm (2”) voice coil wound on high powered kapton former, with ventilated magnet assembly and copper shorting ring for low distortion |
| High Frequency Driver | 26mm (1”) doped fabric dome with large roll surround. Ferro fluid cooled. Coupled to a Krix designed 90 x 40 short throw waveguide |
| Input Terminals | Gold plated spring terminals |
| Dimensions | 940mm high x 315mm wide x 205mm deep (2040mm wide including subwoofer modules) |
| Subwoofer Modules | |
| Frequency Range | 25Hz-200Hz in room response |
| Power Handling | 200 – 500* Watts RMS recommended amplifier power |
| * The use of a power amplifier with high pass filter and soft limiter function is strongly recommended on MX subwoofers. | |
| Sensitivity | 92dB for 2.83 volts at 1 metre |
| Impedance | 4 Ohms |
| Enclosure Type | Bass reflex, down-firing vent |
| Low Frequency Driver | Nominal 305mm (12”) diameter paper cone driver with 50mm (2”) long throw voice coil developed for high level, low frequency reinforcement |
| Input Terminals | High level gold plated spring terminals |
| Dimensions | 940mm high x 540mm wide x 205mm deep (2025mm wide including LCR modules) |
| System Recommendations | |
| Minimum Screen Size 16:9 | 92″ (2037mm x 1146mm) |
| Minimum Screen Size 21:9 | 100″ (2335mm x 1001mm) |
