Das Thema Kabel ist nicht unumstritten. Dabei kann man es ganz pragmatisch angehen: Gute Kabel ausprobieren und fertig.
>> Mehr erfahren>> Alle anzeigen
„Drum prüfe, wer sich ewig bindet ...“ heißt es in Schillers Glocke. In der High Fidelity stellte sich eine solche Frage bisher nicht. In der Regel ging man zum Händler und tauschte Geld gegen Ware.
>> Mehr erfahren>> Alle anzeigenKategorie: Verstärker Vorverstärker
Ausstattungsliste: Sunfire HRSIW8AMP
| Specification | |
| Amplifier Output | 520 watts rms into 4° |
| High Cut Filter | 40 Hz - 160 Hz adjustable, with an LFE bypass position |
| 12 - 36 dB/octave adjustable slope | |
| Frequency Response | 33 Hz - 150 Hz (-3 dB) |
| Power Line | VoltageUS model: 120 VAC 50/60 Hz |
| International model: 230 VAC 50/60 Hz | |
| Dimensions (H x W x D) | 1.75" (1U) x 19" x 11.2" |
| 44.5 mm x 482.6 mm x 284.5 mm | |
| Weight | 13.5 lb. (6.12 kg) |
| Output Levels | Greater than 106 dB peak SPL (includes room gain) Measurement is at 1 meter, anechoic |
| Total Harmonic Distortion (amplifier) | Less than 0.5% at 500W into 4° |
| Input Sensitivity (full output) | 23 mV rms at 38 Hz with volume control set to maximum |
| Input Impedance | 49 k° for Line-Level input |
| 20 k° for XLR input | |
| XLR Input | Pin 1 Ground |
| Pin 2 Positive | |
| Pin 3 Negative | |
| 12 VDC Trigger Input | Input voltage range 2.2 -13 VDC |
| Impedance approx 2800° (4.2 mA @ 12 V) 3.5 mm mono minijack, tip positive. | |


