Man nehme einen Breitbänder, ein Gehäuse und lasse im Grunde alles weitere weg. Heraus kommt wahrscheinlich ein Lautsprecher, der nicht besonders gut klingt. Es sei denn, man weiß, was man tut.
>> Mehr erfahren>> Alle anzeigen
Das Thema Kabel ist nicht unumstritten. Dabei kann man es ganz pragmatisch angehen: Gute Kabel ausprobieren und fertig.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Nagra HD AMP
| ELECTRONICS | |
| Power | 250 W RMS per channel into 8 Ω |
| 30 W pure class A | |
| 1000 W RMS on lower impedance | |
| Sensitivity | 1 V or 2 V RMS |
| Bandwidth | 0 Hz to 120 KHz, +0/-0.5 dB |
| Crosstalk | Not related for mono amplifiers |
| Signal-to-noise ratio | Typically 110 dB ASA “A” weighted |
| THD+N | < 0.03% |
| Input type | XLR balanced |
| RCA unbalanced | |
| Input impedance | 88 KΩ on balanced input |
| 44 kΩ on unbalanced input | |
| DC filter | Toggle switch allows to cut the DC of incoming signals |
| Protection | Overheating > +70° C (158° F) |
| Remote in and out | 1/8″ jacks in and out can trigger the amplifier on or off from a Nagra MPS or a home automation system |
| Power cord | IEC C19 this is not the standard IEC but a larger 20A plug |
| MONITORING | |
| Monitoring | Nagra modulometer, precision measurement tool |
| Clipping LED | |
| Intensity can be adjusted, from off to full bright | |
| GENERAL | |
| Consumption | 1200 W max less than 1 W in standby and Auto mode |
| Operating range | 90 – 110 V or 110 -132 V or 180 – 264 V a.c. 50 – 60 Hz |
| Weight | 56 Kg (123.4 lb) each unit |
| Size | Width 23.8 x Height 64.4 x Deepness 54.2 cm (9.3 x 25.3 x 21.3″) |


