Das Thema Kabel ist nicht unumstritten. Dabei kann man es ganz pragmatisch angehen: Gute Kabel ausprobieren und fertig.
>> Mehr erfahren>> Alle anzeigen
Man nehme einen Breitbänder, ein Gehäuse und lasse im Grunde alles weitere weg. Heraus kommt wahrscheinlich ein Lautsprecher, der nicht besonders gut klingt. Es sei denn, man weiß, was man tut.
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecher Surround
Ausstattungsliste: Tannoy Revolution XT C
| Specification | |
| PERFORMANCE | |
| Recommended amplifier power (Watts RMS) | 15 - 90 |
| Continuous power handling (Watts Peak RMS) | 45 |
| Peak power handling (Watts) | 240 |
| Sensitivity (2.83 Volts @ 1m) | 89 dB |
| Nominal Impedance (Ohms) | 8 |
| Frequency response (-6dB) | 62 Hz - 52 kHz |
| DRIVE UNITS | |
| Dual Concentric High frequency | 20 mm (0.79") Linear PEI dome with Torus Ogive WaveGuide and Omnimagnet technology |
| Dual Concentric Low frequency | 100 mm (4”) multi-fibre paper 35 mm (1.38”) voice coil |
| CROSSOVER | |
| Crossover Frequency | 2.8 kHz |
| Crossover Type | Passive low loss 2nd order low pass, 1st order high pass |
| CABINET | |
| Enclosure type | Rear ported reflex |
| Volume | 7.6 l (0.27 cu. ft.) |
| Dimensions (H x W x D) (inc plinth) | 176.9 x 450 x 205.6 mm |
| Weight | 7.9 kg (17.5 lbs) |
| Finish | Dark Walnut |
| Medium Oak | |
|
305-2128
MD Sound GmbH & Co. KG |



