Man nehme einen Breitbänder, ein Gehäuse und lasse im Grunde alles weitere weg. Heraus kommt wahrscheinlich ein Lautsprecher, der nicht besonders gut klingt. Es sei denn, man weiß, was man tut.
>> Mehr erfahren>> Alle anzeigen
Audio System hat seiner modernsten DSP-Endstufengeneration eine kleine Überarbeitung gegönnt, die in der Praxis einen großen Unterschied macht.
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecher Inwall
Ausstattungsliste: Tannoy DVS 4
| Specification | |
| SYSTEM | |
| Frequency Response (-3dB) (1) | 75Hz – 20kHz |
| Frequency Range (-10dB) (1) | 60Hz – 30kHz |
| System Sensitivity (1W @ 1m) (2) | 84dB |
| Dispersion (degrees conical) | 110 |
| Transducers | Coaxial |
| Low Frequency: 100mm (4.00") mineral loaded cone material | |
| High Frequency: 20mm (0.79") | |
| Crossover | 3.9kHz - 2nd order LF, 2nd order HF |
| Directivity Factor (Q) | 6.5 averaged 1kHz to 10kHz |
| Directivity Index (DI) | 5.3 averaged 1kHz to 10kHz |
| Rated Maximum SPL (2) | Average: 100dB |
| Peak: 106dB | |
| Power Handling | Average: 40W |
| Programme: 80W | |
| Peak: 160W | |
| Recommended Amplifier Power | 80W @ 6 Ohms |
| Impedance | 6 Ohms |
| Distortion | |
| 10% Full Power (4.9V) | 2nd Harmonic 3rd Harmonic |
| 250Hz | 0.738% 2.20% |
| 1kHz | 0.145% 0.234% |
| 10kHz | 0.070% 0.070% |
| Distortion | |
| 1% Full Power (1.55V) | 2nd Harmonic 3rd Harmonic |
| 250Hz | 0.320% 0.311% |
| 1kHz | 0.078% 0.174% |
| 10kHz | 0.087% 0.087% |
| CONSTRUCTION | |
| Enclosure | ABS |
| Grille | Aluminium |
| Connectors | Euroblock type removable locking connector with screw terminals with "loop through" facility |
| Supplied Accessories | Yoke bracket |
| Dimensions (H x W x D) | 277.0 x 170.4 x 165.6 mm (10.91" x 6.71" x 6.52") |
| Net Weight | 1.8kg (3.96lbs) |
| Packed Quantity | 2 |
| Included Accessories | C Ring Tile bridge Paint mask Cutout template Grille |
| Optional Accessories | Plaster (Mud) ring |
| Arco Grille | |
| Packed Quantity | 2 |
|
305-2128
MD Sound GmbH & Co. KG |



