Das Thema Kabel ist nicht unumstritten. Dabei kann man es ganz pragmatisch angehen: Gute Kabel ausprobieren und fertig.
>> Mehr erfahren>> Alle anzeigen
Man nehme einen Breitbänder, ein Gehäuse und lasse im Grunde alles weitere weg. Heraus kommt wahrscheinlich ein Lautsprecher, der nicht besonders gut klingt. Es sei denn, man weiß, was man tut.
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecher Inwall
Ausstattungsliste: Tannoy DC6i
| Specification | |
| SYSTEM | |
| Frequency Range 1 | 70Hz - 45kHz |
| System Sensitivity (1W @1m) 2 | 90dB (1W = 2.83V for 8 Ohms) |
| Dispersion (-6dB) | 90 degrees conical |
| Driver Complement | 150mm (6.00”) constant directivity Dual Concentric™ |
| Crossover | Passive 1.6kHz with dynamic HF protection |
| Directivity Factor (Q) | 4.5 averaged 1kHz to 10kHz |
| Directivity Index (DI) | 6.4 averaged 1kHz to 10kHz |
| Rated Maximum SPL | Average: 110dB |
| Peak: 116dB | |
| Power Handling | Average: 100W |
| Programme: 200W | |
| Peak: 400W | |
| Recommended Amplifier Power | 100 - 200W @ 8 Ohms |
| Nominal Impedance | 8 Ohms |
| Distortion | |
| 10% Full Power (8.94V) | 2nd Harmonic |
| 250Hz: 2.4% | |
| 1kHz: 0.20% | |
| 10kHz: 1.19% | |
| 3rd Harmonic | |
| 250Hz: 0.46% | |
| 1kHz: 0.53% | |
| 10kHz: 0.19% | |
| 1% Full Power (2.83V) | 2nd Harmonic |
| 250Hz: 0.48% | |
| 1kHz: 0.01% | |
| 10kHz: 0.46% | |
| 3rd Harmonic | |
| 250Hz: 0.37% | |
| 1kHz: 0.24% | |
| 10kHz: 0.07% | |
| CONSTRUCTION | |
| Enclosure | MDF, vented and internally braced |
| Finish | Textured black paint |
| Connectors | 2 x 4mm gold plated binding posts |
| Fittings | 8 x M10 bracket inserts |
| 4 x wallplate keyhole fixings allowing landscape or portrait mounting orientations | |
| 1 x Wall mounting plate | |
| Dimensions (H x W x D) | 334 x 250 x 214mm (13.15 x 9.84 x 8.45”) |
| Weight | 7kg (15.4lbs) |
|
305-2128
MD Sound GmbH & Co. KG |



