Topthema: Weiter, immer weiter Symphonic Line - Phonostage MK 4

Mit einem Erfahrungsschatz aus 5 Jahrzehnten Symphonic Line hat Rolf Gemein längst seine Klang-Signatur gefunden

Topthema: Standlautsprecher · Stieb Audio Patos Die große Reduktion

Man nehme einen Breitbänder, ein Gehäuse und lasse im Grunde alles weitere weg. Heraus kommt wahrscheinlich ein Lautsprecher, der nicht besonders gut klingt. Es sei denn, man weiß, was man tut.

>> Mehr erfahren >> Alle anzeigen

Kategorie: Lautsprecher Inwall

Ausstattungsliste: Tannoy CMS 403DCe

Ausstattung & technische Daten

Specification
SYSTEM
Frequency Response (-3 dB) (1) BM Backcan	110 Hz - 50 kHz
Frequency Range (-10 dB) (1) BM Backcan	80 Hz - 54 kHz
System Sensitivity (1W @ 1m) (2)	88 dB (1 W = 4 V for 16 Ohms)
Nominal Coverage Angle	90 degrees conical
Power Handling (3)	Average: 60 W
Programme: 120 W
Peak: 240 W
Recommended Amplifier Power	120 W @ 16 ohms
Nominal Impedance (Lo, Z)	16 Ohms
Rated Maximum SPL	Average: 107 dB
Peak: 113 dB
Transformer Taps (via front rotary switch)	70 V: 30 W (165 O) / 15 W (330 O) / 7.5 W (660 O) / 3.75 W (1320 O) / OFF & low impedance operation
100 V: 30 W (330 O) / 15 W (660 O) / 7.5 W (1320 O) / OFF & low impedance operation
TRANSDUCERS
Dual Concentric point source driver	1 x 100 mm (4.0”) Dual Concentric driver, using Omnimagnet technology
Low Frequency	35 mm (1.38”) voice coil, treated multi fiber paper pulp cone
High Frequency	20 mm (0.79”) PEI dome
PHYSICAL
Enclosure	Backcan: Reflex loaded UL 94V-0 rated ABS
Baffle: Reflex loaded UL 94V-0 rated ABS
Grille: Steel, with weather resistant coating
Safety Features	Safety ring located at rear of enclosure for load bearing safety bond
Clamping Design	Security toggle clamp
Blind Mount (BM)	Complete with fixed backcan
Cable Entry Options	Cable clamp & squeeze connector for conduit up to 22 mm
Conduit Knockouts on PI Backcan	3 Sets of horizontal positions 19 / 22 / 28 mm (0.75” / 0.87” / 1.10”)
Connectors	Removable locking connector with screw terminals with “loop through” facility
Dimensions
Bezel Diameter	205.0 mm (8.07”)
Front of ceiling to rear of pod	147.6 mm (5.81”)
Hole cutout diameter	187 mm (7.36”)
Net Weight (ea)	2.75 kg (6.06 lbs)
Included Accessories	C Ring Tile bridge Paint mask Cutout template Grille
Optional Accessories	Plaster (Mud) ring
Packed Quantity	2